VIDEO: Unboxing the EVOM™ Manual TEER meter

EVOM™ Manual is WPI's newest instrument to measure Trans Epithelial Electrical Resistance (TEER). Let's look at what comes with the system and how easy it is to setup.

 

 

 

The EVOM™ Manual comes with the following components in the box:

evom kit

(1) EVOM™ Manual TEER measurement meter

(1) 32 GB USB drive for data storage. This contains a Python program for continuous digital monitoring of a target insert.

(1) USB cable

(1) 1000Ω Test Resistor is supplied to verify the measurement accuracy of the unit. When the mode is set to 10K Ohms, the display should read 1K Ohms when the test resistor is inserted in the probe port.

(1) A/C power cord and charger which are used to charge the unit. When you are taking measurements, the unit should run on its battery power,

(1) Foot switch for hands-free operation

 

You can download this instruction manual at www.wpiinc.com/manuals.

 

The setup of the unit is simple.

  1. Plug in the electrode into the PROBE port on the right side.

  2. Plug in the foot switch into the marked port on the back panel.

  3. Insert the USB thumb drive into the USB port on the right side.

  4. Turn the unit on using the power switch on the back panel.

 

If you have any questions, call us at (866) 606-1974 or email [email protected].

 

Get More Details