This website uses cookies to ensure you get the best experience on our website.
Read more
VIDEO: How to Remove EVOM Auto Electrode Array Lock
February 22, 2024
How to Remove the Electrode Array Packaging Lock from the EVOM™ Auto
EVOM™ Auto, with both 24 and 96 HTS multiwell plate capability, is a high throughput screening (HTS) platform offering fast, noninvasive sample scanning by comparing electrical resistance measurements (transepithelial/transendothelial electrical resistance: TEER). TEER measurement experiments are simple to set up and less time consuming than more complex molecular studies. TEER measurement can be used as the primary scanning method to identify any physiological changes that can then be further evaluated by other methods. EVOM™ Auto can capture TEER measurements in 24 and 96 HTS multiwell plates from Corning, Millipore, or MatTek. The sample preparation time in these HTS plates is efficient, allowing for fast, multi-channel pipetting options.
The EVOM™ Auto autosampler ships with a red electrode array lock in place to prevent the electrode array connection port from moving during transit. Here you can see how to easily remove it without damaging the lock or the autosampler.
- Pinch the lock at the top.
- Lift the slide on the side.
- Push the locking mechanism towards the right till the clasp releases from the slot in the base plate.
- Firmly grasp the electrode port cap and pull it out of the port socket.
If you have an questions, just give us a call at (866) 606-1974 or email us at [email protected].
Close