Microinjection

Researchers at the University of Michigan are using WPI's PV820 for injecting a morpholino solution into the lumen of the otic vesicle of 1-day old zebrafish embryos.  Then, they use electroporation to introduce mif and mif-like morpholinos into the developing inner ear tissues.

Check out the ...more

In this video, Mike Pizza demonstrates how to front fill a Nanofil syringe using MicroFil.

More Info

The Nanoliter injector is a micro-processor controlled injection system that uses direct piston displacement. The collet assembly (exploded view) is shown in the image below. The glass pipette fits into the white, plastic sleeve (spacer). When the collet is screwed in place securely, the black rubber washers are compressed and hold the glass firmly in place.

Nanoliter 2000

A side view of the assembled Nanoliter injector is shown below.

Nanoliter 2010 

As the plunger is depressed, it pushes into the glass to expel the liquid in the pipette. Eventually, the diameter of the plunger matches that...more

When it comes to setting up microinjection systems, the options appear endless. The pictures below give some broad suggestions on how you might set up your own system. Keep in mind that many parts are interchangeable depending on your needs or preferences.

In general, you will need a stereo microscope on a stand, a light source, one or two micromanipulators with stands, and one or two injection systems. The following images show various setups for microinjection, and all the WPI part numbers are included for easy reference.

Remember, when you set up your own system, choose the parts that fit your needs. For example:

• M10 or the M9 magnetic base could be used.
• PZMIV...more

Eliminate the cost and trouble of making your own micropipettes — WPI can quickly supply your need for consistently sized pre-pulled glass micropipettes for injection of dyes or proteins into cells, oocytes and for many other biomedical laboratory applications. Tip diameters (ID) range from 0.1 to 10 micrometers. Micropipettes are available as plain shank or with luer fittings.

• Schott Duran borosilicate glass
• 0.5 micrometer and smaller ID micropipettes include an internal glass fiber for easy filling
• Tip inner diameter tolerance ±20%
• Short taper yields high strength
• Nominal length ≈ 50 mm
• OD:ID = 1.33:1
• Standard capillary outer diameters are 1.0 mm (thin-wall) or 1.14 mm
• Every pipette individually tested and inspected
• Vacuum packed

Silanized Tips (Luer Shank)

Silanization waterproofs the glass to retard water when inserting into cell. This will not let...more

Specially designed tips as small as 36 gauge (110 micron OD) are offered in both blunt and beveled styles. Our studies have shown that these tips will cause less trauma to the tissue than any other form of micro syringe currently in use. NanoFil has a unique coupling mechanism that allows many different forms of small tubing and tips to be coupled with the syringe barrel.

Direct Microinjection by Hand

This is the simplest and most economical way to inject. Any of our tips can be inserted directly into the NanoFil syringe. Even the SilFlex tubing can be inserted to switch from hand injection to the other methods listed below. The limitation of this method is the difficulty...more