VIDEO: How to Set the Controlled Temperature for the ATC2000

ATC2000 is a low noise heating system for maintaining animal body temperature during experimental procedures. The ATC2000 has three temperature sensors. One is located in the heated plate, and the other two can be plugged into the RTD and TC input ports. The ATC2000monitors all three temperature readings. You can choose which of the three the unit will control. The ATC2000 then heats (or stops heating) the plate to keep the controlled temperature within the alarm limits.

  1. To set the controlled temperature, press the SRC button.
    Heater source RTD Temp sourceThermocouple temp source
  2. Press the Up or Down key to select a temperature source.
    NOTE: If the unit is placed in adaptive mode, then the heater plate is not available as a temperature source option here.
  3. To make the selected temperature source the default temperature source, press the SRC button again. A *D* appears on the display next to your choice to indicate that it is the default temperature source. The unit will retain the default setting even after you power off the ATC2000.
    Default temp source
  4. Press the Display button to save the new temperature source.

 

If you have any questions, just give us a call.