ELECTRODE TIPS HYDROGEN

$75.00
Prices valid in USA, Canada, and PR only.
Order code
TIPH
Prices valid in USA, Canada, and PR only.

Replacement tips

Set of 3 hydrogen replacement tips for ion selective electrodes. Change the tip on your holder in less than a minute.

Prices valid in USA, Canada, and PR only.

Features

  • Replacement tips for KWIK-TIP Ion Selective Electrodes

 

Notes

The tips should be stored dry under refrigeration prior to use. Once filled, the membrane tip can last up to 30 days and be used for that length of time. The tip is fragile and the “membrane” gets softer when wetted. After use, the tips can be placed into storage. Before storage, wash the exterior and carefully blot it dry. Leave the filling solution inside the electrode and seal it with parafilm. Then, place it in a dry container and store it in the refrigerator.

The KWIK Ag/AgCl pellet should be washed in distilled water, dried and stored in a dry, dark location. If desired, you may change to a new ionic solution, however, it takes time for the old ionic solution to exchange out of the KWIK pellet and be replaced with the new ionic concentration.This should be done in a small beaker and the contaminated solution should be discarded.  The new tip and electrode should be filled with fresh solution.

More Information
SKU TIPH
  Electrode
Color Code
Filling Solution
Nim. Slope/Decade
Concentration Range
Selectivity Coeffiecients (-log)
TIPCA 
Calcium Green 0.1M CaCl2 28mV 0.1 - 10-6.75M Na+ 5.5, K5.4, Mg++ 4.9
TIPH 
Hydrogen Orange 1M Citric acid, 0.01M NaCl, pH 5.6 54mV pH 5.0-12 Na+ 10.4, K9.8, Ca++ 11.1
TIPK 
Potassium Yellow 0.1M KCl 54mV 0.1 - 10-4.5M Na+ 4.0, Ca++ 3.9, Mg++3.0
TIPTPP 
TPP+ Purple 10mM TPP+ 54mV 0.001 - 10-4M K6.0
Back to Top