This website uses cookies to ensure you get the best experience on our website.
Read more
TWEEZERS, HIGH PRECISION
$164.00
Prices valid in USA, Canada, and PR only.
Order code
504518
Prices valid in USA, Canada, and PR only.
WPI's Swiss Tweezer Set has five pair of tweezes with fine tips for precision work in microsurgery, microdissection, and applications requiring fine manipulation of tissue or small objects under a microscope. Some have fine, straight, pointed tips, one pair has flat, rounded tips, and one pair has fine curved tips. These are hand forceps with a spring action letting you pinch the blades together to control the amount of pressure used. They are manufactured from anti-magnetic, acid-resistant stainless steel, which is suitable for autoclaving or chemical sterilization. The acid-resistant, anti-magnetic alloy works well in an MRI environment. All of these surgical forceps are quality Swiss-made instruments.
Prices valid in USA, Canada, and PR only.
Features
- High precision set of 5 forceps
- Antimagnetic, acid-resistant stainless steel
General Notes
- Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
- Contains from 16.5 to 18.5 percent by weight ofchromium and has important quantities of nickel and molybdenum as additional alloying elements
- Non-magnetic
- Good corrosion resistance to most chemicals, salts and acids
- Generally used where corrosion resistance and toughness are primary requirements
- Typical applications include tweezers for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments
SKU | 504518 |
---|
Mechanical properties:
State | annealed |
Density | 8.0 g/cm³ |
hardness HB30 | ≤215 |
Hardness Rockwell B | 79 |
Tensile strength, ultimate | 500-700 MPa |
Tensile strength, yield | 290 |
0.2% Yield stress | ≤200 MPa |
Elongation, break | 40% |
Modulus of elasticity | 200 GPa |
Thermal properties
Coef. of lin. therm expansion | 16.0 E-6/°C | 20°C-100°C |
Coef. of lin. therm expansion | 17.0 E-6/°C | 20°C-300°C |
Specific heat capacity: | 0.50 J/(g·K) |  |
Thermal conductivity: | 15W/(m·K) |  |
Continuos use temperature: | 350°C |  |
Max service temperature, ait | 925°C |  |
Electrical properties
Resistivity | 0.75 E-4 Ohm.cm |