This website uses cookies to ensure you get the best experience on our website.
Read more
WPI #7, CVD, SS, 11.5CM, SWISS
$53.00
Prices valid in USA, Canada, and PR only.
Order code
504505
Prices valid in USA, Canada, and PR only.
Swiss Microdissecting Forceps have curved fine tips for precision work in microsurgery, microdissection, and applications requiring fine manipulation of tissue or small objects under a microscope. These are hand forceps with a spring action letting you pinch the blades together to control the amount of pressure used. They are manufactured from an acid-resistant, anti-magnetic alloy, and they works well in an MRI environment. These surgical forceps are quality Swiss-made instruments. They may be sterilize using an autoclave or by chemical sterilization.
Prices valid in USA, Canada, and PR only.
Features
- Swiss Made Microdissection Tweezers
- 11.5 cm (4.5") Long
- 0.18 × 0.2 mm Curved tips
- Acid-resistant/antimagnetic
- Surgical grade stainless steel
General Notes
- Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
- Contains from 16.5 to 18.5 by weight of chromium and has important quantities of nickel and molybdenum as additional alloying elements
- Non-magnetizable
- Good corrosion resistance to most chemicals, salts and acids
- Generally used where corrosion resistance and toughness are primary requirements
- Typical applications include tweezers for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments
SKU | 504505 |
---|
Mechanical properties:
State | annealed |
Density | 8.0 g/cm³ |
hardness HB30 | ≤215 |
Hardness Rockwell B | 79 |
Tensile strength, ultimate | 500-700 MPa |
Tensile strength, yield | 290 |
0.2% Yield stress | ≤200 MPa |
Elongation, break | 40% |
Modulus of elasticity | 200 GPa |
Thermal properties
Coef. of lin. therm expansion | 16.0 E-6/°C | 20°C-100°C |
Coef. of lin. therm expansion | 17.0 E-6/°C | 20°C-300°C |
Specific heat capacity: | 0.50 J/(g·K) | |
Thermal conductivity: | 15W/(m·K) | |
Continuos use temperature: | 350°C | |
Max service temperature, ait | 925°C |
Electrical properties
Resistivity | 0.75 E-4 Ohm.cm |