Pre-Pulled Glass Pipettes, Luer/Pack of 10

As low as $209.00
Only %1 left
Prices valid in USA, Canada, and PR only.
Order code
Prices valid in USA, Canada, and PR only.

WPI can quickly supply your need for consistently sized, pre-pulled, glass, calibrated micropipettes. Tip diameters (ID) range from 0.1 to 10 µm. Silanized Tips (Luer Shank) are available. Silanization waterproofs the glass to retard water when inserting into cell. This will not let the outside fluid run down the glass pipettes and get inside so easily.These glass needles are fabricated from Schott Duran borosilicate glass.

Prices valid in USA, Canada, and PR only.

Calibrated micropipettes eliminate the cost and trouble of making your own micropipettes

Features

  • Schott Duran borosilicate glass pipettes
  • 0.5 µm and smaller ID micropipettes include internal glass fiber for easy filling
  • Tip inner diameter tolerance ±20%
  • Short taper yields high strength
  • Nominal length ≈ 50 mm
  • OD:ID = 1.33:1
  • Every glass pipette individually tested and inspected
  • Vacuum packed
  • Luer fitting
  • Glass Outside Diameter: 1.0mm thin wall
  • MicroTips with an ID smaller than 1µm have a filament
  • 10 per package
  • Also available: Plain Tips, Luer/Silanized TipsSample Packages

Glass Micropipette Options

Order code Tip ID Shank Length Glass OD Filament Fire Polish
TIP01TW1F-L 0.1µm -- 1.0mm Thin wall Yes --
TIP02TW1F-L 0.2 µm -- 1.0mm Thin wall Yes --
TIP05TW1F-L 0.5 µm -- 1.0mm Thin wall Yes --
TIP1TW1-L 1 µm -- 1.0mm Thin wall No --
TIP2TW1-L 2 µm -- 1.0mm Thin wall No  --
TIP5TW1-L 5 µm -- 1.0mm Thin wall No --
TIP10TW1-L 10 µm -- 1.0mm Thin wall No --
TIP30TW1-L 30 µm    -- 1.0mm Thin wall No --

 

Benefits

  • Calibrated Micropipettes can be purchased with plain shank or Luer fittings

Applications

  • Injection of dyes or proteins into cells, oocytes or other biomedical laboratory applications

WPI can quickly supply your need for consistently sized, pre-pulled, glass, calibrated micropipettes. Tip diameters (ID) range from 0.1 to 10 µm. Silanized Tips (Luer Shank) are available. Silanization waterproofs the glass to retard water when inserting into cell. This will not let the outside fluid run down the glass pipettes and get inside so easily.These glass needles are fabricated from Schott Duran borosilicate glass.

Certificate of Compliance

A Certificate of Compliance is available for these MicroTips. Please request one when placing your order.

μTips

Image Descriptions
Micropipette_5um_400X Calibrated Micropipette, 5μm, 400X
Micropipette_10_5um_40X Calibrated Micropipette, 10μm and 5μm, 40X
Micropipette_10_5um_100X Calibrated Micropipette, 10μm and 5um, 100X
Micropipette_10um_400X Calibrated Micropipette,10μm, 400X
tip_2um_5_135x μTip 2um, 135x
TIP10TW1 TIP10TW1
tip_2um μTip 2μm
tip_2um_2_10x μTip 2μm, 10x
tip_2um_3_60x μTip 2um, 60x
tip_2um_4_90x μTip 2μm, 90x
TIP30_2 TIP1
TIP30 TIP30
TIP30_2 TIP30

 

NOTE: Due to supply constraint, this product is currently non-returnable/non-refundable. For details, please refer to the WPI Terms & Conditions.

More Information
SKU VAR-3565
CTE (20 °C; 300 °C)     3.3± 0.110-6/K
Transformation temperature Tg   525 ± 15 °C
Density   2.23 ± 0.02 g/cm3
Temperature  at the viscosity 1013 dPa·s
107.6 dPa·
104 dPa·s
560 ± 10°C
820 ± 10°C
1260 ± 20°C
Heat conductivity l at 100 °C 
Specific heat CP  
  1.2W/(m·K)
0.8J / (g·K) 
Elasicity-modulus 
Poisson-ratio μ
  64GPa
0.20GPa
Photoelasticity
Refractive index nd 
  4.0·10-6 mm² / N
1.473mm² / N
Relative dielectric constant 
tan d
at 1 MHz
and 25 °C
4.6 10-4
37 10-4
Tk 100 (DIN 52326)    250°C
Classes of chemical stability water 
acid 
alkaline solution  
DIN ISO 719 
DIN 12 116
DIN ISO 695 
Back to Top