Nerve Cuff Standard

Nerve cuff electrodes are designed for reliable recording and/or stimulation of any peripheral nerve. They can be used acutely or for chronic implantation, with a wide selection of inner diameters available to be selected based on the nerve diameter. The nerve cuffs are designed to provide flexibility in electrode contact location for recording and stimulation protocols.How to configure your nerve cuff electrode

Configurations

Many custom combinations of inner diameters and contact arrangements are available for standard, micro and nano nerve cuffs.

1  Optional Sutures

2  1 to 24 Contacts ( Platinum, Platinum/Iridium or Stainless Steel)

3  Custom length

4  Custom Diameter

5  Stranded Stainless Steel Leads


Your Contact Information


Title
First Name
Last Name
Position
Institution
Department
Phone
Fax
Email

Design specifications


1. Inner diameter
1.1 Specify i.d.# in full mm
2. Number of contacts (Specify 1-9 rings)
3. Distance between contacts (mm)
4. Distance from the last contact to the edge of the cuff (mm)

Typical three times distance between contacts, to provide maximum isolation.

5. Length of the stranded SS leads
5.1 If other please specify (mm)
6. Angle of the leads leaving the cuff
 45°
 90°
 Parallel to NCE

45 angle NCE  90 angle NCE   Parallel NCE

                           45°                                                           90°                                             Parallel to NCE

7. Do you require the leads with silicone encapsulation?
8. Do you require sutures threads embedded in the cuff?
9. Connector (s)
 Non connector
 MP-A11365-001: Male Omnetics connector-8 channe; 10-pin
 MP-A12623-001: Male Omnetics connector-8 channel; 10-pin; 0.050” pitch with latching mechanism
 MP-A8393-001: Male Omnetics connector-8 channel; 10-pin; 0.025” pitch; 2 guide post
 MP-A79000-001(NPS-09-DD-GS): Male Omnetics connector-7 channel; 9-pin; 0.050” pitch
 MP-A79014-001(NPD-18-DD-GS): Male Omnetics connector-16 channel; 18-pin; 0.025” pitch; 6 guides posts
 MP-A70242-001: Male Omnetics connector- 16 channel; 18-pin; 0.025” pitch; 6 guides posts; Nickel free; MRI compatible
 MP-A79038-001 (NPD-18-DDGS): Male Omnetics connector-16 channel; 18-pin; 0.025”pitch; 2 guide posts
 MP-A79022-001(NPD-36-DD-GS): Male Omnetics connector-32 channel; 36-pin; 0.025”pitch; 4 guide posts
 MP-A72312-001: Male Omnetics connector-32 channel; 36-pin; 0.025”pitch; 4 guide posts; Nickel free; MRI compatible
 Other (Describe below)
9.1 Other connector

Connector image

Nervecuffconnector


About your order


How many of this Nerve Cuff design do you wish to order?
Special requirements