Setup WPI CleanRay-2000 Ultraviolet Room Sterilizer
When your protection from bacteria, molds and viruses is important, WPI's CleanRay-2000 becomes a critical piece of your personal protective equipment. WPI's CleanRay-2000 UV Sterilizer can sterilize a small room in 30-60 minutes. Here we show you how to install the UV bulb in the lamp and setup your unit.
The CleanRay-2000 UV Room Sterilzer is easy to setup. Before you begin, though, we offer a few warnings.
WARNING: THIS UNIT USES UVC LIGHT, WHICH WILL DAMAGE SKIN AND EYES. PEOPLE AND PETS SHOULD NEVER BE IN THE ROOM WHEN THE ULTRAVIOLET STERILIZER IS ON.
CAUTION: Always use gloves when handling the ultraviolet light bulb used in this portable UV room sterilizer.
CAUTION: Handle the bulb gently. Like all light bulbs, it is fragile.
- The box containing the UV sterilizing light bulb is wedged inside the UV lamp housing for shipping. After unpacking the Ultraviolet Room Sterilizer, carefully remove the UV bulb box from the lamp housing. Then, remove the UV bulb from its box.
- Align the pins on the UV bulb with the socket in the base of the lamp, and gently slide the ultraviolet bulb into place. Press it down firmly until the bulb snaps into place.
- Install the A23 battery in the remote control
Call us today to discuss your application.
(866)606-1974 toll-free in the USA