Microforges, Pullers, Bevelers Application Guide
Part NumberDescription
DMF1000
DMF1000  
Description: Complete Microforge System; includes Programmable Digital Controller and Microscope
Application: Fabrication of special shapes of glass micropipettes. For example, pressure polishing of patch clamp pipettes and making of holding pipettes. Unique for pipette tip calibration and microinjection pipettes.
Features: Most sophisticated and only microforge on the market with built-in pressure polishing capability. Programmable controller with 10 user-selectable memory storage (of heat and time) for reproducibility.
MF200
MF200  
Description: Complete Microforge System, with analog controller
Application:Use to fire polish glass micropipettes and prepare special shapes
Features: Comes with W30S Microscope, a 40x objective and three filament sizes. Uses exclusive Kohler illuminator instead of industry standard frosted glass illuminator for less glare and sharper image.
48000
48000  
Description: Microbeveler System
Application:Bevels micropipette tips larger than 1μm at 5400 RPM for applications such as microinjection.
Features: Solid surface unit beveler with rotating disk. Includes basic kit with abrasive alumina lapping film.
1300M
1300M  
Description: Microelectrode Beveler and start-up kit
Application: Glass micropipette beveler for submicron tips.
Features: Includes M3301R Manipulator and M10 magnetic stand.
MES
MES  
Description: Microelectrode Beveler System
Application: Glass micropipette beveler for submicron tips.
Features: Includes 1300M Microelectrode Beveler, 1350M Micropositioner and magnetic stand, OmegaZ, 5052 Steel base plate, 5468 adapter and 3485 Ringstand mount
MBS
MBS  
Description: Microelectrode Beveler System
Application: Bevels micropipette tips larger than 1μm at 5400 RPM for applications such as microinjection.
Features: Includes 48000 Microbeveler, NOVA illuminator, fiber optic cable, PZMIII stereo zoom microscope with special tilt base, two 20X eyepieces, one 20x eyepiece with reticle, tool holder and pipette holder FOIMPH
OMEGA-Z
OMEGA-Z
Description: Omega-Tip-Z with Probe and Holder
Application: Measures impedance of metal and glass capillary microelectrodes.
Features: Comes with probe, probe handle and cables.
PMP-102
PMP-102 
Description: Pneumatic, 18-Step Programmable Multipipette Puller
Application: Produces two symmetrical glass pipettes
Features: Equipped with microcomputer, pneumatic pulling arm, optical-digital ruler. Pulling process is programmable and under control of a preset sequence.
PMP-107
PMP-107  
Description: Programmable Multipipette Puller
Application: Produces two symmetrical 4- or 7-barrel glass pipettes
Features: Equipped with microcomputer, pneumatic pulling arm, pneumatic rotator, optical-digital ruler. Pulling process is programmable and under control of a preset sequence.
PUL-1000
PUL-1000 
Description: Programmable Micropipette/Microelectrode Puller
Application: Produces two symmetrical glass pipettes with each pull. Ideal for zebrafish and microinjection.
Features: Equipped with microcomputer. Store up to 95 programs, Four stage.

 

More Info