Laboratory Equipment Blog

Monitor the Growth of Epithelial Cells in Vitro Manually

Posted: Friday, November 20, 2015

TEER Measurement SystemsAre you ready to perform experiments involving a cultured cell monolayer? If your monolayer has not reached confluence, you may have holes or gaps in the monolayer that would prevent collection of valid experimental data. When confluence is reached, the electrical resistance across the monolayer peaks and then plateaus. The EVOM2 meter was designed specifically for this application.

The EVOM2 is the ideal meter for use when you are making manual TEER measurements on small batches of cell cultures and do not require a high throughput system.

Setting Up Your Automated TEER Measurement Robot

Posted: Tuesday, April 14, 2015

FAQs about TEER Measurement

Posted: Monday, February 2, 2015

Recording TEER Measurements from an EVOM2

Posted: Tuesday, November 11, 2014

EVOM2  is used for making manual TEER measurementsThe EVOM2 is the classic, hand-held instrument for making Trans Epithelial Electrical Resistance (TEER) measurements. The REMS system adds a robot and data recording for automated TEER measurements. There may be times when you don't have a robot, but would still like to have the data recording capabilities of the REMS system. With a little ingenuity, you can do just that. Here, we will show you how you can add data recording to your standard EVOM2.

REMS High Throughput TEER Robot Gets Software Upgrade

Posted: Friday, May 30, 2014

Software Upgrade for REMS

The REMS AutoSampler automates measurements of electrical resistance of transepithelial, transendothelial or Caco-2 cell membranes being grown to confluence on microporous filters of high throughput screening (HTS) 24- and 96-well microplates.

REMS Robotic TEER Measurement for HTS

Posted: Tuesday, April 8, 2014

This video gives a quick overview of the brand new REMS system for TEER measurement.

FAQ: Troubleshooting Unstable Resistance Readings from an ENDOHM

Posted: Monday, November 18, 2013

If the resistance reading from your Endohm don't stabilize, you may need to do some troubleshooting.

This test resister fits into the RJ-11 plug on the EVOM2

STX100 Electrodes TEER Measurement

Posted: Friday, October 11, 2013

STX100 Electrode for making TEER measurements with EVOM2WPI's STX100 electrodes for Trans-epithelial electrical resistance (TEER) measurements increase accuracy and reproducibility of TEER readings (±5) of the STX100 electrode compared to the standard STX2.