Laboratory Equipment Blog

Calibrating Your Oxygen Sensor for use with the TBR

Posted: Friday, October 10, 2014


Setting up OxyMicro and OxyMini

Posted: Tuesday, April 30, 2013

Oxygen measurement is simpler than ever. Just stick a disposable, oxygen-sensitive "spot" to the inside of a flask, beaker, test tube or bottle, and fill the container with the solution to be tested. Then, on the outside of the glass container, hold the fiber optic wand close to the spot to take a reading. As the spot reacts with oxygen, it gives off light, which is measured with the fiber optic wand. This ingenious system is highly accurate and affordable. Two different units (which use the same operating principles are available: OXY-MINI and OXY-MICRO. 


Biosensor Specifications

Posted: Monday, April 29, 2013

WPI offers a range of biosensors for monitoring nitric oxide, hydrogen peroxide, oxygen and hydrogen sulfide.


How to Calibrate an ISO-HPO100

Posted: Wednesday, April 24, 2013


How to Fill a 2mm Sensor Sleeve with Filling Solution

Posted: Wednesday, April 24, 2013


How to Make 0.1M Copper II Chloride

Posted: Wednesday, April 24, 2013


How to Make PBS Buffer Solution

Posted: Wednesday, April 24, 2013