Laboratory Equipment Blog

Low Flow Dampening Kit for a Pump

Posted: Monday, December 8, 2014

This simple kit helps to dampen the pulsations of a peristaltic pump.


Recording TEER Measurements from an EVOM2

Posted: Tuesday, November 11, 2014

EVOM2  is used for making manual TEER measurementsThe EVOM2 is the classic, hand-held instrument for making Trans Epithelial Electrical Resistance (TEER) measurements. The REMS system adds a robot and data recording for automated TEER measurements. There may be times when you don't have a robot, but would still like to have the data recording capabilities of the REMS system. With a little ingenuity, you can do just that. Here, we will show you how you can add data recording to your standard EVOM2.


Using a DAM50 for EEG Recordings in Rodents

Posted: Tuesday, October 21, 2014

A low-noise amplifier like the DAM50 is an excellent choice for EEG recording in rodents. WPI’s amplifiers were engineered for the bio-medical researcher. While 20-30μV of noise is common in bio-amplifiers, WPI’s DAM series amplifiers generate 0.4μV RMS (root mean squared) at 0.1-100Hz. (That’s equal to about 2μV peak to peak.) This setup shows one way such recordings could be made. The RC1 electrode works well for rats, and the EP1 is more suitable for mouse cranial application.


Caring for your Surgical Instrument Investment

Posted: Friday, October 17, 2014

Intro - Cleaning, Disinfecting, Sterilizing
#2 - Manual Cleaning
#3 - Ultrasonic Cleaning
#4 - Sterilizing

Calibrating Your Oxygen Sensor for use with the TBR

Posted: Friday, October 10, 2014


Choosing a Cellix Pump for Microfluidics

Posted: Wednesday, August 20, 2014

Are you trying to decide which pump is perfect for your application? WPI offers the complete line of Cellix pumps and biochips.


How To Use the Micro4 Controller with a Micro Pump

Posted: Tuesday, August 5, 2014


Nanoliter 2010, Perfect for Microinjection

Posted: Monday, July 21, 2014