This website uses cookies to ensure you get the best experience on our website.
Read more
Neuroscience Cannulas for in vivo Investigation of Rodents
April 21, 2013
The WPI cannula system for neuroscience study and pre-clinical research includes an entire range of cannula options. You are guaranteed:
- Exceptional Quality
- Best Prices
- Rapid Order Response
The three primary components include the Guide Cannula, the Internal Cannula and the Dummy Cannula (cap).
- WPI cannulas are beveled inside and out and then polished to remove any burrs and ensure that the inside diameter is perfectly cylindrical. This limits undesired trauma to tissue and ensures smooth operation.
- WPI offers exceptional quality at the best prices.
- Quantities of each item are kept in stock so you can order as needed.
Guide Cannulas
The Guide Cannula is a surgical grade, stainlesssteel tube that is implanted into a rodent's skull and cemented into place using dental cement and screws. It guides the Internal Cannula to the specific injection site.Internal Cannula
The Internal Cannula is inserted into the Guide Cannula to sample or inject fluid.
Dummy Cannula
The Dummy Cannula has a stainless steel wire core, and it is placed in the Guide Cannula when the Internal Cannula isremoved. It seals the opening and prevents tissue from entering the bottom of the Guide Cannula. The Dummy Cannula is threaded to securely tighten it so that the animal will not unscrew it while grooming.
Dummy Cannulas are ordered based on the projection length, just like the Internal Cannulas.
Ordering
Order the Guide Cannulas based on the gauge and length from the base, and the Internal or Dummy Cannulas based on the length of the Guide Cannula and the projection from the Guide Cannula tip
Understanding Part Numbers
Cannula Type
-
GC–Guide Cannula
- INC–Internal Cannula
- DUMC–Dummy Cannula
Gauge–Choosethe gauge of the Guide Cannula that will be used, even if you are specifying an Internal or Dummy Cannula. Choices include 22, 24 and 26 gauge.
Length–GuideCannulas can be ordered in a range of lengths from 3.4–8.5mm. Length can be specified to 0.1mm, with a tolerance of ±0.07mm. For example, a GC24-60 is a 24ga. cannula that is 6.0mm long. For other cannulas, the length is determined by the desired projection length and the guide cannula length. The projection can extend beyond the tip of the Guide Cannula up to 1.0mm.
DUMC Length = GC Length + Projection
INC Length= GC Length + Projection
For example, for an Dummy Cannula flush with the end of a 24ga. Guide Cannula that is 6.0mm long, order an DUMC22-60. For an inernal cannula that projects 0.5mm beyond the 6.0mm Guide Cannula (6.5mm), order an INC22-65.
Accessories
GCXX-YY |
Guide Cannula, XX gauge (22, 24 or 26), Y.Y mm below plastic pedestal (3.4–8.5mm) |
INCXX-ZZ | Internal Cannula, XX gauge (22, 24 or 26), Z.Z mm below plastic pedestal (3.4mm–9.5mm) |
DUMCXX-WW | Dummy Cap, XX gauge (22 or 26), WW mm below plastic pedestal (3.4–9.5mm) |
504278 | Flexible PE Tubing, 0.25mm ID, 0.5mm OD, 1m long |
504279 | Flexible PE Tubing, 0.42mm ID, 0.85mm OD, 1m long |
504280 |
Flexible PE Tubing, 0.6mm ID, 1.1mm OD, 1m long |
504281 | Fixing Screw for Connecting Injector and Guide Cannula |
504282 | Instant Cyanoacrylate Adhesive, 3g |
504283 | Instant Cyanoacrylate Adhesive, 20g |
Close