SP Series Syringe Pumps Microprocessor-controlled syringe pumps for applications requiring high metering precision at low, pulse-free rates

1. Select syringe from table stored in the pump's memory and displayed on the LCD.

2. Enter the volume to be dispensed.

3. Enter the flow rate, press "start." It's fast and simple.

Your settings are permanently stored in memory -- there's no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides real-time readings using both parameters and values for clearer, mistake-free readings. The SP200 series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.

This inexpensive single-syringe infusion pump combines precision and simplicity with outstanding ease of use and durability.

• Holds any size syringe, 10 µl to 50 ml
• Automatic volume control and shutoff
• Simple menu-driven setup: dispense volume, dispense flow rate, syringe diameter (selected from displayed table)
• Last settings stored in permanent memory
• Continuous dispense volume display

Developed especially for use in microdialysis experiments, these pump produces very fine syringe movement. The modified SP100i gearing features a sixfold gear reduction compared to standard models, allowing pumping at much smaller flow rates. (See sensors such as ISO-NO and Micro-C for detection of dialysates.) The SP101i is a dual barrel infusion only pump.

• Holds two syringes, 10 µl to 10 ml or (1) 60 mL

A second syringe mount has been added to the basic SP100i, with both syringes activated by a single pusher block for simultaneous infusion and withdrawal. This pump has all the features of the SP100i, plus:

• Holds two syringes, from 10 µl to 10 ml.

The SP210iw offers you more advanced features than any other infusion/withdrawal pump in its price range--including five operating modes plus independent rate and volume settings for both infusion and withdrawal.

• All features of SP200i
• Independent rate and volume settings for infusion and withdrawal
• Multiple mode selection: infusion, withdrawal, infusion then withdrawal, withdrawal then infusion, or continuous cycle.

Ideal for applications requiring multiple syringes, the SP220i and SP230iw are adaptations of the SP200i and SP210iw, respectively. Each has been modified to hold up to 10 syringes.

• SP220i has all features of SP200i
• SP230iw has all features of SP210iw
• Both have the same multiple syringe holder accommodating 10 syringes up to 10 ml, or 6 syringes up to 50 ml, or 4 syringes up to 140 ml.

Features are the same as SP200i but can have four syringes of different sizes, from 10 µl to 10 ml.

The SP210c and the SP260p can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two other syringes are withdrawing at the same rate. The SP260p is used for single cycle applications only. The SP210c will automatically reverse direction upon reaching the set volume and begin the next cycle. With the use of 3-way valves the pump can empty and refill syringes for a continuous dispense.

• Knob locks/unlocks drive block for effortless, drag-free adjustment
• Simple menu-driven setup: Syringe diameter (selected from displayed table), Dispense volume, Dispense flow rate
• Continuous dispense volume display
• Preset volume control and automatic shutoff
• Settings can be reviewed or changed during operation
• Optical encoder stall detection
• Choice of unit selection
• Last settings stored in permanent memory
• Built-in RS-232C interface for computer linking or "daisy chaining" up to 100 pumps.
• TTL interface for foot switch, timer, relay control; outputs for run indicator, valve control