Micro4 Controller

Micro4™ Smart Controller

An integral component in the UMP system is a microprocessor-based controller which provides an "intelligent" and easy-to-use interface to the syringe pump. Operating parameters are set with the membrane keypad and LCD display. From the keypad the user can select the following functions: set pump to infusion or withdrawal mode, enter the volume to be infused or withdrawn, rate of delivery, and syringe type as well as starting and stopping the pump. The operation of one to four syringe pumps can be programmed and synchronized using this controller.

Now Handles .5, 1.0, 5, 10, 25, 50, 100, 250, 500 and 1000 µl syringe programs
User parameters can be stored in the device's "non-volatile" memory for instant recall when the unit is powered on.
An optional footswitch can be plugged into a connector on the rear of the controller for "hands free" start / stop operation.

Computer Control--An RS-232 port on the rear of the controller can be used to connect it to a computer for use with computer control programs.

MICRO4	Micro4 Controller
OPTIONS AND ACCESSORIES
15867	Footswitch for Micro4
40400	Adapter for A203XV Nanoliter Injector
40500	RS-232 Cable, 9-pin "D" connector


Micro4™ *Smart Controller*
	An integral component in the UMP system is a microprocessor-based controller which provides an "intelligent" and easy-to-use interface to the syringe pump. Operating parameters are set with the membrane keypad and LCD display. From the keypad the user can select the following functions: set pump to infusion or withdrawal mode, enter the volume to be infused or withdrawn, rate of delivery, and syringe type as well as starting and stopping the pump. The operation of one to four syringe pumps can be programmed and synchronized using this controller.