|
|
| NANOLITER INJECTOR |
 WPI's microprocessor-controlled Nanoliter 2000 uses direct piston displacement. By either pushing the injection button on the control box or pressing on the optional footswitch, a calibrated volume will be smoothly injected. The process is quiet and vibration free. Capillary filling and injection speeds are 23 nL/sec and 46 nL/sec (emptying speeds are 92 nL/sec and 230 nL/sec). Maximum fluid ejection is 5 µL. Each unit comes with sufficient glass to pull at least 300 tips. Glass is 1.14 mm O.D. (nominal) and 0.5 mm I.D.
By setting the DIP switch, the injection volume can be changed from 2.3 to 69.0 nL in 16 steps. Up to 100 injections may be triggered per filling. Since the volume of a normal Xenopus oocyte is about 500 nL, the instrument has the capability to inject from less than 1% to over 10% of the total volume of the oocyte in one preset step increment.
Included: 1 vial 3.5-in. capillaries (100); 1 vial 7-in. capillaries (100); replacement “O” rings; Allen wrench; MicroFil™ MF34G backfilling needle; and two sample µTip™ pre-pulled micropipettes.
|
|
| WPI recommends the following equipment for a complete system,: PZMII stereo microscope • MMJ joystick micromanipulator • M10 magnetic base • µTip™ micropipettes. |
Smart Controller:
Micro4, an optional microprocessor-based controller, can provide an intelligent and easy-to-use interface to up to four Nanoliter Injectors. Operating parameters are set with the membrane keypad and LCD display. From the keypad the user can set pump to infusion or withdrawal mode, enter the volume to be infused or withdrawn, and rate of delivery, as well as synchronize the starting and stopping of a combination of Injectors. User parameters can be stored in the device’s non-volatile memory for instant recall when the unit is powered on. An optional footswitch can be plugged into a connector on the rear of the controller for hands free start / stop operation. An RS-232 port on the rear of the controller can be used to connect it to a computer for use with computer control programs.
|
|
|
NANOLITER INJECTOR SPECIFICATIONS
|
| INJECTION VOLUME |
Variable |
| REMOTE CONTROL |
Yes |
| GLASS OD |
1.19 mm |
| GLASS ID |
0.5 mm |
| INJECTION SPEED |
23 nl/sec |
| FILL SPEED |
23 nl/sec |
| EMPTY SPEED |
46 nl/sec |
| VARIABLE VOLUME RANGE |
2.3 - 73.6 nl |
| SMALLEST VOLUME |
4.6 nl |
| TO CHANGE VOLUME |
Set switch |
| INJECTIONS PER FILLING, MAX. |
100 injections |
| SHIPPING WEIGHT |
3 lb. (1.1 kg) |
|
| B203XVY |
Nanoliter 2000 (120 V, U.S. plug) |
| B203XVZ |
Nanoliter 2000 (240 V, Continental plug) |
| B203XVB |
Nanoliter 2000 (240 V, British plug) |
| B203MC4 |
Nanoliter Injector & Micro4 Controller (small controller not included) |
| OPTIONAL ACCESSORIES |
| 13142 |
Nanoliter Injector Footswitch |
| 4878 |
Replacement 3.5-in. glass capillaries (300) |
| 4879 |
Replacement 7-in. glass capillaries (300) |
| TIP10XV119 |
Micropipettes for Nanoliter Injector (10) |
| MICRO4 |
Micro4 Controller, Four-Channel |
| 30003 |
Adapter for Micro4 to nanoliter injector |
| 5340 |
Spare Parts Kit ( includes MicroFil MF34G, displacement piston, five O-ring sets ) |
| 500778 |
Replacement Nanoliter Injector Universal Adapter |
| 40500 |
RS-232 cable 9-pin for micro controller |
|
|
References |
|
|
