|
|||||||||||||||||||||||
|
OxyMini Systems
DOWNLOAD DATA SHEET |
|||||||||||||||||||||||
| OxyMini Systems The OxyMini is a single-channel fiber optic oxygen meter for WPI’s fiber optic oxygen minisensors. These sensors are based on 2 mm polymer optical fibers and have a length of 2.5 m. A wide range of applications is possible with these sensors. |
|||||||||||||||||||||||
|
• Process control: bottling plant in breweries and quality control of packages • Biotechnology: Control of cell culture media and non-invasive control of bioreactors • Implantation of oxygen sensors into soil and trees. |
|||||||||||||||||||||||
|
View MiniTip This oxygen dipping probe (WPI #501641) has a tip diameter of 4 mm and consists of a polymer optical fiber, with a oxygen sensitive coating. The MinTip’s range is 0 to 100%. This robust sensor has a response time of approximately 40s. View MiniFlow The MiniFlow oxygen probe (WPI #501642) is a miniaturized fiber optic chemical sensor integrated in a T-shape flow through cell. The standard T-shape flow cell can be easily connected via Luer-Lock adapters to external tubings. Liquids (e.g., water, blood, etc.) can be pumped through the cell. The sensor has a response time of approximately 40 s and an excellent long-term stability. View MiniFoil WPI offers the sensor material on a 1 cm2 support disk made of polyester. This material can be glued, for example, inside glass vials and the oxygen concentration can be measured non-invasively and non-destructively from outside through the wall of the flask. A plastic fiber optic cable (WPI #501644, WPI #501645) is used to illuminate the sensor foil. The wall of the flask must be transparent/non-fluorescent. Response time of approximately 50 s. The material can be implanted into animal tissues or custom-made housings. |
|||||||||||||||||||||||
| OxyMini and OxyMicro Chart | |||||||||||||||||||||||
|
|||||||||||||||||||||||
