|
|
UltraMicroPump III - inject volumes as small as picoliters using a microsyringe |
|
|
- * See "Reproducible and Efficient Murine CNS Gene Delivery Using Microprocessor Controlled Injector," A.I. Brooks et al.,
- Journal of Neuroscience Methods, 80 (1998) 137-147
|
- With its digital controller, UltraMicroPump III can dispense as little as 600 picoliters per incremental advance of the syringe piston (using a 5 µL syringe). Syringes may be filled externally and then inserted into the pump or filled while mounted in the pump. Fluids injected or withdrawn are held entirely within the micro syringe to maintain a low fluid dead volume.
- For positioning, the UltraMicroPump III may be attached to any of several WPI micropositioners such as the M3301 (manual), DC3001 (motorized), or any manual stereotaxic manipulator.
|
- Smart Controller
- An Integral component in the UMPIII system is a microprocessor-based controller, Micro4, which provides an "intelligent" and easy-to-use interface to up to four syringe pumps. Operating parameters are set with the membrane keypad and LCD display. From the keypad the user can select the following functions: set pump to infusion or withdrawal mode, enter the volume to be infused or withdrawn, rate of delivery, and syringe type as well as synchronize the starting and stopping of any combination of syringe pumps.
- User parameters can be stored in the device's "non-volatile" memory for instant recall when the unit is powered on.
- An optional footswitch can be plugged into a connector on the rear of the controller for "hands free" start / stop operation.
- Computer Control
- An RS-232 port on the rear of the controller can be used to connect it to a computer for use with computer control programs.
|
|
UMPIII ACCEPTS: glass syringes with barrel diameters from 5.5. to 9 mm
|
|
UMPIII-1 |
UltraMicroPump III (one) and Micro4 Controller |
| UMPIII-2 |
UltraMicroPump III (two) and Micro4 Controller |
| UMPIII-3 |
UltraMicroPump III (three) and Micro4 Controller |
| UMPIII-4 |
UltraMicroPump III (four) and Micro4 Controller |
| UMPIII |
UltraMicroPump III (without controller) |
| MICRO4 |
Micro4 Controller, Four-Channel |
| 15867 |
Foot switch |
| 40500 |
RS-232-cable |
VIEW UltraMicro Pump III SPECIFICATIONS
UMPIII shown mounted to Stereotaxic frame (not included)
|
 |
|
Syringes with Luer Fitting (no needle) |
|
WPI P/N |
Volume |
Description |
UMPIII |
UMP2 |
UMP1 |
SP310 |
| ILS005LT |
5 µL |
ILS 5 µL Gas-tight Luer tip |
Y |
Y |
N |
N |
| ILS010LT |
10 µL |
ILS 10 µL Gas-tight Luer tip |
Y |
Y |
N |
N |
| ILS025LT |
25 µL |
ILS 25 µL Gas-tight Luer tip |
Y |
Y |
N |
N |
| SGE050TLL |
50 µL |
SGE 50 µL Gas-tight Teflon Luer Lock |
Y |
Y |
Y |
Y |
| SGE100TLL |
100 µL |
SGE 100 µL Gas-tight Teflon Luer Lock |
Y |
Y |
Y |
Y |
| SGE250TLL |
250 µL |
SGE 250 µL Gas-tight Teflon Luer Lock |
Y |
Y |
Y |
N |
|
Syringes with Replaceable Beveled Needles |
|
WPI P/N |
Volume |
Description |
UMPIII |
UMP2 |
UMP1 |
SP310 |
| SGE0005RN* |
0.5 µL |
SGE 0.5 µL 23 ga (0.63 mm) 70 mm long |
Y |
Y |
Y |
Y |
| SGE001RN* |
1.0 µL |
SGE 1.0 µL 26 ga (0.47 mm) 70 mm long |
Y |
Y |
Y |
Y |
| SGE005RN |
5 µL |
SGE 5 µL 23 ga (0.63 mm) 50 mm long |
Y |
Y |
Y |
Y |
| SGE010RNS |
10µL |
SGE 10 µL 26 ga (0.47 mm) 50 mm long |
Y |
Y |
Y |
Y |
| SGE025RN |
25 µL |
SGE 25 µL 25 ga (0.50 mm) 50 mm long |
Y |
Y |
Y |
Y |
| SGE050RN |
50 µL |
SGE 50 µL 25 ga (0.50 mm) 50 mm long |
Y |
Y |
Y |
Y |
| SGE100RN |
100 µL |
SGE 100 µL 25 ga (0.50 mm) 50 mm long |
Y |
Y |
Y |
Y |
|
Replaceable Needles |
|
RN0005
|
For syringe SGE0005RN, 23 ga (0.63 mm) 70 mm long |
| RN001 |
For syringe SGE001RN, 26 ga (0.47 mm) 70 mm long |
| RN005 |
For syringe SGE005RN, 23 ga (0.63 mm) 50 mm long |
| RN010 |
For syringe SGE010RN(S), 26 ga (0.47 mm) 50 mm long, 5-pack |
| RN025 |
For syringe SGE025RN, 26 ga (0.47 mm) 50 mm long, 5-pack |
|
| |
|
See: luer-fitted micropipette holders MPH6R andMPH6S |
| |
|
|
| |