Quote Cart

Your Cart is currently empty.

Products Menu

like us on facebook New stuff, articles, promos

Tech Support and Returns

PDFPrintE-mail

High Voltage Isolator, Bipolar with Charger

Order # SYS-A365RC

High Voltage Isolator, Bipolar with Charger
View Full-Size Image


 
Ask a question about this product

  • Conventional logic-level commands
  • Can be gated by any pulse generator, stimulator, or computer output
  • Bipolar Pulsing
  • Uses rechargable batteries
  • Designed for Neuroscience & Muscle applications



Click here to visit the online store. Not all products are available in the store.



Features

Activated by conventional logic-level commands, Model A365 can be gated by any pulse generator, stimulator, or computer output.

Dual Tone Audible Alarms

A tone sounds when an open electrode circuit is detected or when system compliance is reached. A second optional tone sounds when a signal is applied to the input. A test switch is also provided to check battery charge.

Current Delivery

Stimulus currents are set using a three-digit control knob and a three-position range switch. Output current tracks control set­tings to better than 1%. Output current is load independent; voltage sufficient to push the desired current through the load is automatically developed, subject only to compliance limits. Model A365 produces up to 10 milliampere current, in three ranges, at more than 100 volts compliance.

Polarity

Output polarity is determined by a three-position switch on the front panel (+/-/off).

Bipolar Pulsing

Bipolar current is toggled by the command waveform, setting alternating pulses as positive or negative.

OUTPUT WAVEFORM DC or current pulse
OUTPUT CURRENT RANGES 0.1, 1.0, and 10mA
CURRENT AMPLITUDE ERROR 0.5% of full scale, max.
CURRENT RESOLUTION 0.1% of full scale, typical
OUTPUT LOAD VOLTAGE EXCURSION (COMPLIANCE) 100V
EXTERNAL COMMAND THRESHOLD 5V at 3mA, min. 8.5V, max.
OUTPUT POLARITY Reversible, manual switch or automatic
CURRENT RISE TIME & DELAY 6μs, typical (1KΩ load)
CURRENT FALL TIME & DELAY 10μs, typical (1KΩ load)
OUTPUT TO GROUND RESISTANCE 1012Ω
OPTOCOUPLER 2500V, rated min. breakdown voltage
POWER: Model A365D (dry cell) 16 alkaline 9V batteries, included
POWER: Model A365R (rechargeable) 16 rechargeable NiMH 9V batteries incl.
DIMENSIONS 8.5 x 3.5 x 5 in. (22 x 9 x 12 cm)
SHIPPING WEIGHT 4 lb. (1.8 kg)
There are no references for this product.
To place an order for this product, please contact the appropriate WPI office or distributor.

Customers from North America can order direct from our corporate office:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258
  • Phone or Fax
    Toll-free: 866-606-1974 Tel: 941-371-1003 Fax: 941-377-5428
  • Our Customer Service Representatives are available 8am - 6pm EST.
  • Online Store
    Many of our products are available for purchase through our online store. At this time we can only accept orders from the U.S. through the online store.
  • Want instant pricing? Order a free catalog here
International customers, please see our office and distributor contact information list.
A362 Battery Charger
3468 Dual Rack Mount Kit for A365
3469 Single Rack Mount Kit for A365
13347 BNC to double banana connector
2851 BNC to BNC cable,
500257 BNC to BNC cable, 6"
500258 BNC to BNC cable, 12"
500259 BNC to BNC cable, 18"
500184 BNC to BNC cable, 10'
5470 Isolated Bioamplifier
DRL Dummy Load Resistor kit

 

No application notes are available for this product at this time.
more categories


Luer Tip



Replacement Needle



Needles



Last Updated: Friday, 25 May 2012 14:14


TOLL FREE: 866.606.1974