Two-Syringe Infusion/Withdrawl Pump

Sturdy, reliable, and easy to use

Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through set­up: First, select syringe from table stored in the pump's memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press "start." It's fast and simple. Your settings are permanently stored in memory - there's no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.

Features

The SP210iw offers you more advanced features than any other infusion/withdrawal pump in its price range - including five operating modes plus independent rate and volume settings for both infusion and withdrawal. This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application. Features include: holds two syringes, 10 to 140 mL, backlit LCD display, knob locks/unlocks drive block for effortless, drag-free adjustment, simple menu-driven setup: Syringe diameter (selected from displayed table), Dispense volume, Dispense flow rate, continuous dispense volume display, preset volume control and automatic shutoff, settings can be reviewed or changed during operation, optical encoder stall detection, choice of unit selection, last settings stored in permanent memory, built-in RS-232C interface for computer linking or "daisy chaining" up to 100 pumps, TTL interface for foot switch, timer, relay control; outputs for run indicator, valve control, independent rate and volume settings for infusion and withdrawal, and multiple mode selection: infusion, withdrawal, infusion then withdrawal, withdrawal then infusion, or continuous cycle.

Mode	Infusion/Withdrawal
Syringe Size	10µL to 140mL (two)*
Maximum Flow Rate	145 mL/min (140 mL syringe)
Minimum Flow Rate	0.001µL/hr
Linear Force	40 Ib (18 kg)
Advance Per Microstep	0.165 micron
Maximum Step Rate	1600 steps/sec
Minimum Step Rate	1 step/100 sec
Accuracy	< 1% error
Reproducibility	± 0.1%
Dimensions	11 x 9 x 5.5 in. , 28 x 23 x 14 cm
Shipping Weight	12 Ib (5.4 kg)
Notes:	Available 95-135 V or 220-240 V, 50/60 Hz

SP200 Series Instruction Manual
SP200 Programmable Pump Options

K. Martin, T. Henkel, V. Baier, A. Grodrian, T. Schön, M. Roth, J. M. Köhler, J. Metze "Generation of larger numbers of separated microbial populations by cultivation in segmented-flow microdevices" Lab Chip 3. 2003: 202-207

To place an order for this product, please contact the appropriate WPI office or distributor.

Customers from North America can order direct from our corporate office:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258

• Phone or Fax
  Toll-free: 866-606-1974 Tel: 941-371-1003 Fax: 941-377-5428
Our Customer Service Representatives are available 8am - 6pm EST.
• Online Store
  Many of our products are available for purchase through our online store. At this time we can only accept orders from the U.S. through the online store.
• Want instant pricing? Order a free catalog here

International customers, please see our office and distributor contact information list.

There are no accessories for this product.

No application notes are available for this product at this time.