Continuous Cycle Syringe pump

Sturdy, reliable, and easy to use

Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through set­up: First, select syringe from table stored in the pump's memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press "start." It's fast and simple. Your settings are permanently stored in memory - there's no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.

Features

The SP210c can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two other syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 2-way valves, the pump can empty and refill syringes for a continuous dispense. Holds four syringes, 10 mL to 60 mL each. With larger syringes the full volume may not be usable. [With a 60 mL syring, 40 mL is usable; with a 30 mL syringe, the full volume is usable.

Mode	Infusion/Withdrawal (continuous)
Syringe Size	10 µL-60 mL (four)
Maximum Flow Rate	86 mL/min (60 mL syringe)
Minimum Flow Rate	0.001µL/hr
Linear Force	40 Ib (18 kg)
Advance Per Microstep	0.165 micron
Maximum Step Rate	1600 steps/sec
Minimum Step Rate	1 step/100 sec
Accuracy	< 1% error
Reproducibility	± 0.1%
Dimensions	11 x 9 x 5.5 in., 28 x 23 x 14 cm
Shipping Weight	12 Ib (5.4 kg)
Notes:	Available 95-135 V or 220-240 V, 50/60 Hz

SP200 Series Instruction Manual
SP200 Programmable Pump Options

There are no references for this product.

To place an order for this product, please contact the appropriate WPI office or distributor.

Customers from North America can order direct from our corporate office:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258

• Phone or Fax
  Toll-free: 866-606-1974 Tel: 941-371-1003 Fax: 941-377-5428
Our Customer Service Representatives are available 8am - 6pm EST.
• Online Store
  Many of our products are available for purchase through our online store. At this time we can only accept orders from the U.S. through the online store.
• Want instant pricing? Order a free catalog here

International customers, please see our office and distributor contact information list.

There are no accessories for this product.

No application notes are available for this product at this time.