When the KITE is mounted on an an M3 tilting base with the steel weight
and tilted at 45°, the average maximum practical height from the
tabletop to the center of the pivot point on the manipulator is
approximately 20cm.
When the KITE is mounted on an an M10 with the steel plate, the average maximum practical height from the
tabletop to the center of the pivot point on the manipulator is
approximately 32cm.
Features
Vernier scales allow readings to 0.1 mm. X-axis fine control allows readings to 10 µm. Left- or right-handed versions of the KITE micromanipulator are supplied with a standard 12 mm clamp and electrode holder M3301EH.
Mounting
The KITE mounts with two screws as shown in the image below.
To place an order for this product, please contact the appropriate WPI office or distributor.
Customers from North America can order direct from our corporate office:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258
- Phone or Fax
Toll-free: 866-606-1974 Tel: 941-371-1003 Fax: 941-377-5428
Our Customer Service Representatives are available 8am - 6pm EST.
- Online Store
Many of our products are available for purchase through our online store.
At this time we can only accept orders from the U.S. through the online store.
-
Want instant pricing? Order a free catalog here
International customers, please see our
office and distributor contact information list.
The following images show various setups for microinjection. Keep in mind that parts are interchangeable. For example:
- M10 or the M9 magnetic base could be used.
- PZMIV microscope could be used instead of the PZMIII.
- M330l
or the KITE micromanipulators can be used, and these micromanipulators
can be placed on either side. (Keep in mind, though, If you wanted to
use a KITE on the right side of the setup below, you would order a
KITE-R (right hand), or if you want an M3301 on the left side, you
would order an M3301-L.)
- 5479 or 5052 magnetic bases are virtually interchangeable.
- One or two Nanoliters, one or two UMPIII systems, or one Nanoliter and one UMPIII may be used, as desired.
ONE NANOLITER/ONE UMP3-1
ONE NANOLITER
ONE NANOLITER/M3301
ONE NANOLITER/KITE
ONE UMP3-1
