Details
Isolation prevents adverse interaction with other electrodes and instruments. Highly accurate and stable SYS-ISO2 measures oxygen concentrations in aqueous solutions and in gas mixtures. Measurement modes are percent oxygen, parts per million, and oxygen reduction current in nanoamperes.
Detection limit
The lower detection limit (DL) for SYS-ISO2 (in gaseous or in liquid phase) is 0.1 ppm or 0.1%. Oxygen concentration around 0.5 ppm or 0.5% and up can be routinely measured in the gaseous or in the liquid phases. DL for a particular sensor tends to be different in gaseous and liquid phases when the baseline noise level is also different. In the case of SYS-ISO2, however, the baseline noise level is very close whether the electrode is immersed in solution or used in the gaseous phase, so DL for the SYS-ISO2 remains relatively close in either phase.
Electrode
The small tip size (2 mm diameter) and low oxygen consumption of the OXELP electrode make it ideal for measurements in vivo or in vitro. With a T-Adapter (#5399), the sensor probe can be used also for continuous-flow monitoring of oxygen in small fluid volumes. OXELP also features a fast response time, typically 10 seconds. Optional BNC-to-double banana adaptor (#13347) and BNC cable (#500184) allow ISO2 to be connected directly to your chart recorder.
To place an order for this product, please contact the appropriate WPI office or distributor.
Customers from North America can order direct from our corporate office:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258
- Phone or Fax
Toll-free: 866-606-1974 Tel: 941-371-1003 Fax: 941-377-5428
Our Customer Service Representatives are available 8am - 6pm EST.
- Online Store
Many of our products are available for purchase through our online store.
At this time we can only accept orders from the U.S. through the online store.
-
Want instant pricing? Order a free catalog here
International customers, please see our
office and distributor contact information list.
