Bridge8 Transducer Amplifier Module

Configuring Your ISDB System

The ISDB chassis (74030) holds up to eight modules and includes a power supply. You may include any combination of BRIDGE8 Transducer Amplifier modules or ISO-DAM8A single channel modules (74020). If you choose fewer than eight modules, you need to order the ISDB blank panels (74050) to fill the empty slots in the chassis. ISO-DAM8A bioampliers include an 8-pin DIN connector with shielded, unterminated 5' cable. Please specify line voltage when ordering.

Features

Bridge8 is a modular, rack-mountable amplifier system based on a similar architecture to the popular ISO-DAM8A amplifier system. Bridge8 is specifically designed to be used as a signal conditioning amplifier with strain gauges and other powered transducers. Bridge8 includes differential amplifiers featuring high input impedance, high common mode rejection and low current leakage input terminals for low noise operation. The Bridge8 also features a half bridge switch and channel offset A wide variety of WPI transducers are available for force, temperature, pressure and light measurements. The Bridge8 amplifier is a clear choice where convenience and quality are required. Any combination of ISO-DAM8 or Bridge8 modules may be combined in the same enclosure. The ISO-DAM8A module is also available in this rack configuration.

Input impedance	> 1012 Ω
Amplification	1, 10, 50, 100, 500, 1000 & Adjustable
Input leakage current	0.1 pA at 25°C
Voltage ofset adjustment	±50mV (low); ±100mV (high)
Amplifier output voltage	±4.4V (10mA, max.)
Excitation Voltage	10V (±5.0V) 100mA, max.
Equivalent noise signal input	10 10
Low pass filter band (KHz)	0.03, 0.1, 0.3, 1, 5, 10, Wide Band R-C Butterworth 6 dB /octave
System enclosure dimensions .	7 x 17 x 9.2 in
Shipping weight	10 to 21 lb. ( 4.5 to 9.5kg )

There are no references for this product.

To place an order for this product, please contact the appropriate WPI office or distributor.

Customers from North America can order direct from our corporate office:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258

• Phone or Fax
  Toll-free: 866-606-1974 Tel: 941-371-1003 Fax: 941-377-5428
Our Customer Service Representatives are available 8am - 6pm EST.
• Online Store
  Many of our products are available for purchase through our online store. At this time we can only accept orders from the U.S. through the online store.
• Want instant pricing? Order a free catalog here

International customers, please see our office and distributor contact information list.

74020	Iso-DAM8A Single Channel Module
74030	ISDB Chassis and power supply
74040	Iso-DAM8A Active Headstage (separate)
74050	ISDB Blank panels
BRIDGE8	Bridge8 Transducer Amplifier Module
2933	ISDB Rack Mount Kit, 5.25" high
FORT10g	Force Transducer, 10g
FORT10-100	Force Transducer,Dual Range (10 and 100g)
FORT25	Force Transducer,25g
FORT100	Force Transducer, 100g
FORT250	Force Transducer, 250g
FORT1000	Force Transducer, 1000g
47610	Force Transducer, 100g Myobath only
PNEU01	Pressure Sensor, 1 PSIG (6.8Kpa)
PNEU05	Pressure Sensor, 5 PSIG (34.4Kpa)
PNEU15	Pressure Sensor, 15 PSIG (103.4Kpa)
DSPL	Dislacement Transducer (±12mm)
LUME	Photocell (50mV/5mW/cm2)
500184	BNCto BNC 10' cable
3161	8-pin DIN plug
3718	Package of 4, 8-pin DIN (startup kit)
3491	Extension Cable (DIN male, DIN femaile), 5' (1.5m)
74016	Kit, CABLAY ISO-DAM8A, 5' multi-strand, unterminated cable with 8-pin DIN

No application notes are available for this product at this time.