Login Form
Variety of Pre-pulled Micropipettes Available Print E-mail

tips_opt.jpeg

Eliminate the cost and trouble of making your own micropipettes — WPI can quickly supply your need for consistently sized pre-pulled glass micropipettes for injection of dyes or proteins into cells, oocytes and for many other biomedical laboratory applications. Tip diameters (ID) range from 0.1 to 10 micrometers. Micropipettes are available as plain shank or with luer fittings.

  • Schott Duran borosilicate glass
  • 0.5 micrometer and smaller ID micropipettes include an internal glass fiber for easy filling
  • Tip inner diameter tolerance ±20%
  • Short taper yields high strength
  • Nominal length ≈ 50 mm
  • OD:ID = 1.33:1
  • Standard capillary outer diameters are 1.0 mm (thin-wall) or 1.14 mm
  • Every pipette individually tested and inspected
  • Vacuum packed

Silanized Tips (Luer Shank)

Silanization waterproofs the glass to retard water when inserting into cell. This will not let the outside fluid run down the pipette and get inside so easily.

Catalog # Shank Tip I.D. Shank Length Glass O.D. Filament Fire Polished
TIP01TW1F Plain 0.1µm — 1.0 mm Thin-Wall Yes No
TIP02TW1F Plain 0.2µm — 1.0 mm Thin-Wall Yes No
TIP03TW1F Plain 0.3µm — 1.0 mm Thin-Wall Yes No
TIP04TW1F Plain 0.4µm — 1.0 mm Thin-Wall Yes No
TIP05TW1F Plain 0.5µm — 1.0 mm Thin-Wall Yes No
TIP1TW1 Plain 1µm — 1.0 mm Thin-Wall No Yes
TIP2TW1 Plain 2µm — 1.0 mm Thin-Wall No Yes
TIP5TW1 Plain 5µm — 1.0 mm Thin-Wall No Yes
TIP10TW1 Plain 10µm — 1.0 mm Thin-Wall No Yes
TIP10XV119 Plain 10µm — 1.14 mm A203XV glass * No Yes
TIP30TW1 Plain 30µm — 1.0 mm Thin-Wall No Yes
TIP01TW1F-L Luer 0.1µm — 1.0 mm Thin-Wall Yes —
TIP02TW1F-L Luer 0.2µm — 1.0 mm Thin-Wall Yes —
TIP03TW1F-L Luer 0.3µm — 1.0 mm Thin-Wall Yes —
TIP04TW1F-L Luer 0.4µm — 1.0 mm Thin-Wall Yes —
TIP05TW1F-L Luer 0.5µm — 1.0 mm Thin-Wall Yes —
TIP1TW1-L Luer 1µm — 1.0 mm Thin-Wall No —
TIP2TW1-L Luer 2µm — 1.0 mm Thin-Wall No —
TIP5TW1-L Luer 5µm — 1.0 mm Thin-Wall No —
TIP10TW1-L Luer 10µm — 1.0 mm Thin-Wall No —
TIP30TW1-L Luer 30µm — 1.0 mm Thin-Wall No —
TIP5TW1LS01 Luer/Silanized 5µm 1 inch 1.0 mm Thin-Wall No —
TIP5TW1LS02 Luer/Silanized 5µm 2 inch 1.0 mm Thin-Wall No —
TIP10TW1LS01 Luer/Silanized 10µm 1 inch 1.0 mm Thin-Wall No —
TIP10TW1LS02 Luer/Silanized 10µm 2 inch 1.0 mm Thin-Wall No —
TIP30TW1LS01 Luer/Silanized 30µm 1 inch 1.0 mm Thin-Wall No —
TIP30TW1LS02 Luer/Silanized 30µm 2 inch 1.0 mm Thin-Wall No —

* 10 µ (ID), 1.14 mm capillary pipettes are for use in WPI’s Nanoliter 2000.

If you have any questions regarding micropettes or other WPI products, give us a call toll-free at 866.606.1974 or email us at This e-mail address is being protected from spam bots, you need JavaScript enabled to view it This e-mail address is being protected from spam bots, you need JavaScript enabled to view it . 

Last Updated ( Tuesday, 23 February 2010 )
 
< Prev   Next >
[ Back ]
TOLL FREE: 866.606.1974